How to distribute mobile Internet from Android phone via Wi-Fi. How to distribute the Internet from a computer via Wi-Fi? Detailed instructions Programs for creating a virtual WiFi hotspot

Often there is a situation when the Internet is connected to one computer or laptop, and it becomes necessary to distribute this Internet to other devices. Smartphone, tablet, or other computer. If you have come to this page, then most likely you know that you can distribute Wi-Fi from a computer and without a router. It is better, of course, to buy an inexpensive router, connect the Internet to it, and it will already distribute it to all devices. But this is not always possible. It is in such cases that a laptop or a computer with a Wi-Fi adapter can be used as a router.

There are several ways to start a virtual Wi-Fi network and make your computer distribute the Internet. I would single out three ways: commands through the command line, through a mobile hotspot, and using third-party programs. We will now take a closer look at each method. You can choose a more suitable option for yourself and proceed to the setup according to the instructions that you will find in this article, or the links that I will leave in the process of writing.

How to distribute the Internet via Wi-Fi from a computer:

• Through the command line. This is the most popular method that works on Windows 7, Windows 8 (8.1) and Windows 10. You need to launch a command prompt, run a few commands, and open Internet sharing. After that, the computer will start broadcasting a wireless network to which you can connect your devices and use the Internet. I have already prepared two detailed instructions:, and. The instructions are almost the same, just written on the example of different operating systems.
• Using the "Mobile Hot Spot" function. This is a standard feature that appeared in Windows 10. Everything is much simpler there. It is enough to set the name of the Wi-Fi network, password, select a connection for public access, and start the access point. Setting instructions: . If you have "ten" installed, then I advise you to first try this method. There are some nuances, which I wrote about in the article at the link above.
• With the help of third party programs. There are many free and paid programs with which you can run a virtual Wi-Fi network on your computer. In fact, these programs also launch distribution through the command line, just a little more convenient. No need to copy commands, etc., just press a button. But these programs do not always work stably and correctly. I also wrote about them in a separate article:.

Those instructions, links to which I gave above, are quite enough to set everything up. But since I decided to make one big and general article on this topic, I will write a detailed guide for each method. Of course with pictures.

Note! If you want to distribute Wi-Fi without a router using a desktop computer (PC), then you must have a Wi-Fi adapter. Internal, or external, which is connected via USB. I wrote about such adapters. In laptops, this adapter is built-in.

It doesn't matter if you have a PC or a laptop - Wi-Fi should work. The driver for the wireless adapter must be installed, and the "Wireless Network" or "Wireless Network Connection" adapter must be in the list of connections. To check the ability to start Wi-Fi distribution, run the command prompt as an administrator and run the command netsh wlan show drivers. Opposite the line "Hosted network support" should be "yes".

Let's move on to the settings.

How to distribute Wi-Fi through the command line?

Let me remind you that this method is suitable for Windows 10, Windows 8 and Windows 7.

You need to run the command prompt as an administrator. In Windows 7, open "Start", then "All Programs" - "Accessories". Right-click on "Command Prompt" and select "Run as Administrator". On Windows 10 and 8, you can simply right-click on the Start menu and select "Command Prompt (Admin)".

Copy and execute (with the Enter key) the following command:

netsh wlan set hostednetwork mode=allow ssid="my_wi-fi_network" key="12345678" keyUsage=persistent

This command sets the name ssid="my_wi-fi_network" and password key="12345678" for a Wi-Fi network that will be distributed by a PC or laptop. You can change your username and password if you wish.

To start the access point itself, you need to run the following command:

This is what the result should be after executing the first and second commands:

Devices can already be connected to a running Wi-Fi network, but only the Internet will not work yet. Need to open internet access.

To do this, go to "Network Connections" (Network and Sharing Center - Change adapter settings). Right-click on the connection through which you are connected to the Internet and select "Properties".

Next, on the "Access" tab, you need to check the box next to "Allow other network users to use this computer's Internet connection" and select a new connection from the list. The name of the connection will have a number (not necessarily the same as in my screenshot), and below the name of the network, which is specified in the first command.

netsh wlan stop hostednetwork

And run again with the command:

netsh wlan start hostednetwork

After these steps, you can connect to a Wi-Fi network called "my_wi-fi_network" (unless you changed it) and use the internet. As you can see, without a Wi-Fi router.

If you encounter a problem when devices cannot connect to an access point, or connect but the Internet does not work, then first of all turn off your antivirus and firewall. See also the articles linked below.

May be useful:

• - when there is no access tab, drop-down list, etc.
• - Solving various problems. Including errors "The hosted network could not be started. The group or resource is not in the right state to perform the required operation."

It should be noted that the computer is not always willing to turn into a router. Sometimes you need to dance with a tambourine 🙂

Set up Mobile Hotspot (Windows 10 only)

In this case, everything is much simpler. Open "Options" (the gear icon button in the start menu) and go to the "Network and Internet" section.

The "Mobile hotspot" tab contains all the settings for this feature. The network name and network password will be immediately written there. If you want to change them, then click on the "Change" button. Set new ones and save.

If you encounter any problems, disable your antivirus and firewall.

You can easily connect your phone, tablet or other device to high-speed Internet connected to the house through a Wi-Fi router (router). However, such a device is not always at hand (for example, you went to the country, taking a laptop and a wireless USB modem with you). In such cases, you can use the Internet on a mobile gadget through a laptop, assigning the functions of a router to it. Consider how to make a laptop a Wifi hotspot.

Ways to create a wireless access point

Any modern laptop is equipped with a wireless adapter that can be used as a Wi-Fi router. To do this, you need to create a kind of virtual bridge that connects network equipment (Wi-Fi adapter and network card).

To get such routing, you can use the following tools:

• standard tools of Windows OS (graphical application "Network Control Center ...", command line or bat-file);
• additional software.

Whichever method is chosen, the following conditions must be met:

Creating a Wireless Access Point Using the Windows Menu

The easiest way to create a virtual router is to use the "Network Control Center ..." function built into the OS. For this you need:

After the virtual router has been created, in order to successfully use the Internet through it, you may additionally need to enable public access. This is done as follows:

After all the steps are completed, turn on Wi-Fi on your mobile gadget and start searching for available networks. In the drop-down list, select the name of the network that was specified when creating the virtual Wi-Fi router, and specify the specified key.

Creating wifi access via command line

To connect your phone to the Internet through a laptop, that is, using a virtual router, you can also use the command line. This procedure may seem complicated to an inexperienced user, however, following the instructions exactly, you will be able to turn on the Wi-Fi point in just a few minutes.

To start distributing wifi from laptop to phone, you need:

To distribute the Internet via a laptop to a phone or other device, you need to enable sharing to the newly created Wi-Fi point. To do this, go to the "Network Connections" section and call the properties of the network through which the Internet is connected to the laptop. After that, in the "Advanced" tab, put a "bird" in front of the corresponding item, and in the drop-down list, select the name of the created virtual router.

Using a bat file

Creating a Wi-Fi access point through the command line is inconvenient because every time you turn off the PC, you need to write all the commands again. Therefore, this method of turning a portable computer into a router can only be used for a one-time Internet connection to a phone.

The execution of the above commands can be fully automated. To do this, you need to write a small script in a standard Windows text editor, and then save the document on the laptop desktop under any name in the .bat format. To start distributing Wi-Fi using a virtual router to your phone, you just need to run this document with administrator rights. An example script is shown in the figure, where YourSSID and YourPassword are the name of the wireless connection and the access key to it.

Creating a virtual router through additional software

If none of the above methods helped activate the distribution of the Internet to your phone, you can try creating a virtual Wi-Fi router using special software. There are a lot of such utilities on the network, but among them the most convenient are:

• MyPublic WiFi;
• connectify.

Sharing Wi-Fi with MyPublicWiFi

This application is absolutely free and has a user-friendly interface, although in a foreign language. With it, you can make a Wi-Fi hotspot with just a few clicks:

Creating a Wi-Fi Hotspot with Connectify

The MyPublicWiFi utility may experience problems if the Internet is not connected to the laptop via a cable, but via a USB modem. In this case, it is better to use the Connectify app. There is a paid and a free version of this program. For occasional use, the second option is sufficient. To enable Wi-Fi distribution from PC to phone using Connectify, you need to:

Possible difficulties when creating a Wi-Fi hotspot

When creating a new Wi-Fi access point, users often encounter minor difficulties. The table shows the most common problems that may prevent you from distributing the Internet from a laptop, and possible solutions.

The essence of the problem	The reason behind it	Possible Solution
The phone cannot locate the Wi-Fi network, although it is running	Blocking the connection with an installed antivirus or firewall	Temporarily disable your firewall or antivirus program
Internet does not work on the phone, although Wi-Fi is connected	The user forgot to enable sharing during setup	Sign in to "Network and Sharing Center" and enable sharing
	The connection is being blocked by a firewall or antivirus.	Temporarily disable online protection
The message "Failed to start the network" pops up	Wireless adapter disabled on laptop	Turn on Wi-Fi in your laptop settings
	Adapter drivers not working properly	Update the drivers using the disk that came with the PC or the Internet

If the PC has a cable Internet connection, then you can quickly organize a Wi-Fi point without buying additional equipment in the form of a router.

The main thing is that the PC has a Wi-Fi adapter. In all modern laptops, such a wireless module is already built in by the manufacturer, and if this unit is not available in a desktop computer, you can purchase and connect it.

The cost of purchasing a Wi-Fi adapter will be significantly lower than the cost of a wireless router.

Wi-Fi distribution methods

There are several effective options for distributing Wi-Fi through a home computer, for example, using the built-in tools of the operating system, using applications from third-party developers, and you can also use mobile Hotspot in Windows 10.

One of the main conditions for the successful implementation of the task is to have a cable connected to the PC from the provider, that is, an Internet source, and the computer must also be equipped with a special wireless module.

If there is no Wi-Fi module in the PC, the most convenient option is to connect an external Wi-Fi adapter to it via the USB port.

It should be noted that the installation of a driver is required for the normal operation of the device.

If your PC is running Windows 10, for the most part, the system installs the software on its own.

If the computer is running on earlier versions of the OS, it is recommended that you visit the official resource of the hardware developer, download and install the drivers on the computer.

In order to analyze the health of the Wi-Fi adapter, you need to open the console with extended rights and type: "netsh wlan show drivers".

Then click "Enter". After that, a message with a positive response should be displayed in the "Hosted network support" column.

After completing the preparatory measures described above and making sure that all the resources are available, you can start organizing a wireless network without using a router.

Without a router. With the help of programs

There are many applications designed specifically to distribute Wi-Fi to the rest of the user's home devices through a computer.

Indeed, almost every modern smart phone on operating systems: Android, Windows and iOS, is able to access the World Wide Web via Wi-Fi.

"mhotspot"

The mHotspot program has a lot of positive reviews.

It does not even need to be installed on a PC or laptop, and by downloading it from the mhotspot.com resource, you can immediately launch and organize a home wireless point without using a router.

After opening the application, you must perform the following steps:

"My Public"

Like the previous utility, it does not need to be installed. It is enough to download “MyPublikWiFi” and use it immediately.

To distribute the Internet using this application, you will need to follow these steps:

"Switch Virtual Router"

In a Windows environment, the program "Switch Virtual Router" works fine. On the Internet, it is available for download and installation for free.

Settings are made in an intuitive interface, which is fully Russified.

The application is able to start automatically immediately after loading the PC. The user is once required to specify the name and password for the created Wi-Fi and set marks in the columns of interest to him.

Without programs

If it is not possible to install specialized utilities on a PC, then you can successfully solve the problem using the built-in Windows tools.

All Windows currently supported by Microsoft are capable of sharing an existing connection.

On different OS

To realize the plan, it is necessary to perform several consecutive steps:

Note: It is better to enter the name invented by the owner of the computer himself, the main thing is that he can remember it and then find it in the list of connections.

To ensure reliable connection security, it is advisable to come up with and print a complex access code, which consists of symbols and numbers, instead of “koddoctupa”.

When you need to stop broadcasting, you need to type in the console: "netsh wlan stop hostednetwork". Click Enter.

Through the command line in Windows 10

In the "Ten", the procedure for turning a PC into a modem is almost the same as performing actions in earlier versions of the OS and is also carried out through the console.

Steps:

1. Run with extended KS permissions and type: "netsh wlan set hostednetwork mode=allow ssid= TochkaDostupa key= koddoctupa";
2. Click "Enter";
3. Insert "netsh wlan start hostednetwork";
4. Click "Enter" again;
5. Right-click "Start", click the line "Network Connections";
6. Right-click on the current connection and enter "Properties";
7. Give permission to other clients to connect.

Windows 10 (Mobile Hotspot)

The new operating system with the index "10" has a convenient method for solving the problem.

Therefore, if the user has this latest development from Microsoft installed, he will simply need to register the name, code and specify the connection through the new function.

You only need to follow a few consecutive steps:

Note: Sometimes the above actions do not lead to a successful solution of the problem. The reason for this is the security utilities running on the PC, so it is recommended to temporarily disable the antivirus and firewall.

Windows 7

Today, "Seven" continues to hold the palm of leadership among the popular operating systems for PCs. In it, you can organize the distribution of Wi-Fi using the OS using 2 methods:

1. Through the console (the technique has already been discussed above in this guide);
2. By setting up the network environment.

Network Neighborhood Setting

In the PC on the "Seven" it is necessary to perform the following actions:

Using the Conectify Hotspot program

It is necessary to perform several steps:

Control over connections is available in the application menu.

How to distribute the Internet from a laptop?

The setup process through a laptop is no different from a stationary PC, so the above methods work great for laptops as well.

The main thing is that the device has a Wi-Fi module or it must be connected via a USB connector.

Create a Wi-Fi hotspot

You can use the Windows tools or the third party apps mentioned above.

In Windows 7, 8 and 10, the way to create a point through the console works great.

After that, you will also need to perform similar actions in the properties of the current connection.

To pause and resume distribution, use the commands shown in the figure below:

As you can see, all actions and commands are completely similar and work well in a mobile computer.

Learn how to quickly share Wi-Fi from your phone and access the Internet on all your devices.

All you need is an Android, iOS or Windows Phone smartphone.

Using a smartphone or tablet, you can easily set up the Internet for your other devices.

This is possible using the "Modem Mode" function, which turns the smartphone into a full-fledged Internet signal router.

If you need to connect to the global network from a computer and have a smartphone with mobile Internet at hand, you only need 1 minute to set up sharing.

Also, several different gadgets can be connected to one access point at once.

Android smartphone

All versions of the Android OS have the function to turn on the hotspot.

Signal distribution requirements:

• Mobile Internet. For normal operation with several connected devices at once, it is recommended to use a 3G or 4G connection;
• Enough traffic. If your tariff has limitations, before creating an access point, we recommend checking the number of remaining megabytes;
• The second device must be able to connect to Wi-Fi.

Internet distribution via Wi-Fi

To access the Internet from the second gadget, it is necessary to enable data transfer over the mobile network on the first device.

Without this, you will connect to the access point, but the sites will not load.

Note! Depending on your version of Android, the names of the menu items may change, but the setup principle remains the same as in the instructions.

Follow these steps:

• Go to the Settings-Mobile networks window;
• Activate data transfer over a cellular network;

• Next, go to Settings again and open the "Wi-Fi hotspot" section;
• In the new window, enter Network name, Type of protection and come up with Access password. Select as many users as possible and save the settings.

• Network name – enter any name by which it will be easier for you to recognize the access point. Enter text in Latin letters.
• Type of protection – this setting is responsible for the level of data encryption over the wireless network. It is recommended to select the WPA/PSK2 option, as it keeps data confidential and does not slow down the Internet connection.
• Password – at least 8 characters. You need to use upper and lower case letters as well. Numbers, special characters. This way you protect the access point from hacking. If you don't specify a password, anyone can connect to the network.

Modem Mode

The second option, how to distribute the Internet from an Android smartphone, is to use a mobile gadget as a USB modem.

This method is suitable if you need to access the Internet from a computer, but it does not support connecting to Wi-Fi networks.

Follow instructions:

• Connect the phone to the computer with a USB cable and wait until the computer recognizes the device;
• Next, the system will automatically install the necessary drivers. If you are using Windows 7 or an older version of the OS, the drivers will have to be installed manually using the Device Manager;
• Then go to Settings on your smartphone. Open the "Network Connections" section;
• Go to the "Other networks" tab, and then click on "Tethering and hotspot";
• Check the USB modem box;

• After activating the function on the smartphone, the computer will automatically recognize the new local network. Go to Windows Network Connections. Right-click on the LAN connection icon and select the "Enable" field.

Your computer will now have an internet connection.

However, it will only work if you have enabled mobile data and have enough internet data.

iPhone and iPad owners

Officially, on the iPhone, you cannot distribute the Internet in hotspot mode. In different versions of iOS, this feature is either present or disappears again.

Even if there is no access point in the settings of your smartphone, you can still distribute the Internet using a simple life hack.

First, make sure you have a 3G or 4G connection.

Then follow these steps:

• Open Settings and go to the "Cellular" window;
• Find the item "Cellular Data" and open it;

• Next, at the very bottom of the window, open the "Modem mode" tab. The "APN" field will appear in the window that opens. You will see several text fields in which you need to enter the value "internet" (without quotes);

• Now the “Modem Mode” section is guaranteed to appear in the main menu. Open it, come up with a network name, and a password.

On the second device, turn on the Wi-Fi network you just created. Check your internet.

If there is no connection, make sure you have activated your data plan or Contact the operator.

Instructions for Windows Phone

Although Windows Phone has many differences from Android and iOS, the option to quickly share the Internet in this operating system is as simple as in previous versions.

Follow instructions:

• Open Settings and go to the "Wireless Networks" window;
• Next, go to "Advanced" and select the "Modem mode" field, after activating the mobile network;

• Select the type of network distribution "Wi-Fi router", USB tethering or Bluetooth tethering. The fastest and most convenient option is Wi-Fi. It does not require wireless connections and provides faster web page loading speeds;

• Click on the required field and come up with a Network Name, its Password. In the "Users" window, you can control how many devices are currently connected to the network and you can block unwanted users.

Settings

On Windows Phone, users have access to enhanced network distribution settingsWi- fi:

• Bandwidth setting. You can independently determine the maximum allowable level of connection speed. To do this, click on the "Bandwidth" field and set the limit. In the future, you can view connection usage statistics;

• WPS setup– How to connect to your network. This can be a PIN code or a push button. If the second gadget has a special WPS button, just activate the hotspot on your Windows Phone and press this key on the other gadget. The connection will be established automatically without entering passwords;

• Energy saving. This add-in window allows you to configure the operation of the access point when no client devices are connected to it. Automatic shutdown will save battery power. You can configure the deactivation of Internet distribution after 5, 10 or 15 minutes of inactivity. Also, you can prohibit turning off the connection, but this will increase battery consumption by an average of 20% -30%.

Please note that on Windows Phone you can set a traffic limit.

This option will be useful for those who have very limited cellular operator service packages.

The limit will not allow you to exceed the amount of traffic you specified and will keep other users able to go online:

• Go to the settings window and go to the section "Applications";
• Click on "Data Control";
• Select Set Limit. Then specify the period for which the restriction will work (day, week, or month), as well as the allowed number of megabytes.

Don't disable background transfer. This may cause errors when connecting to the access point.

The connection speed on client devices may drop slightly, but this is due to additional filtering of content that consumes a lot of traffic.

How to get good internet speed?

Often users encounter problems and errors when distributing Wi-Fi. For example, another user connects to the network, but there is no Internet, or the connection speed is very low.

If the Internet is available on the main smartphone, but not on the connected device, check that the password is entered correctly.

Sometimes it is enough to change the encryption type to a simpler one in order for network access to be resumed.

If you want to increase the speed of the Internet, remember that it directly depends from two factors:

• Connected tariff plan on the phone that gives out a signal;
• The number of connected users.

If you have limited traffic, this can cause the Internet to disappear quickly. Also, pay attention to the type of network (2G, 3G, 4G).

For client devices, it will always be slightly lower.

We recommend that you set the coverage to 4G or 3G in the settings. This will significantly speed up the loading of web pages, since when distributing 2G Internet, it will take you a very long time to load even a regular search engine page.

When distributing Wi-Fi, always check how many gadgets are connected to the access point. For normal operation of the Internet, there should be a maximum of two or three clients.

Otherwise, the available bandwidth will not be enough and the connection will become too slow.

Always set an access password and encryption type so that no one else can connect to the network. Also, it is recommended to change the code word from time to time.

Outcome

Sharing Wi-Fi from your phone is a great feature for setting up a fast global network connection on all your devices.

To do this, you do not need a new router, twisted pair wires and complex settings.

It is enough to have at least one mobile gadget with Internet access and a few minutes of time.

Video instructions

Windows can turn your PC or laptop into a wireless hotspot if you let it share Wi-Fi internet. Setting up Internet distribution on Windows 7, 8 and 10 is somewhat different from each other. Therefore, to install Internet distribution via Wi-Fi, we will consider a separate instruction for each Windows operating system. Go.

The ability to share your computer's or laptop's wired Internet connection to connect wireless devices is available in Windows 7, 8, and 10 without installing additional components. Creating these connections, which are an example of peer-to-peer networks, is easy. In general, a classic example of a peer-to-peer network is a network of the form computer - switch - computer, and that computers have the same rights in this network. And in our case, the Wi-Fi wireless network interface will be responsible for the role of the switch.

Please note that when setting up a peer-to-peer network using the Wi-Fi adapter of your computer to distribute the Internet via Wi-Fi, the current Wi-Fi connection, if any, will be disabled. Since the Wi-Fi adapter will be used to distribute the Internet and it will no longer be able to receive it.

I want to inform you that I am not giving here how, after all the settings, to find the resulting access point on a smartphone or laptop and connect to it. Due to the flourishing of the smartphone market, I think that everyone can connect to a Wi-Fi network.

How to distribute the Internet with Windows 10

1. Run in any way convenient for you: by clicking + I on the keyboard, through the START menu by clicking on the icon. On the main settings page, click the button Network and Internet.

4. In the Edit Network Details window, set the network name and enter your password with at least 8 characters.

That's all you need to do in Windows 10 to distribute the Internet from your computer via Wi-Fi. This is one of the best features of the Windows 10 Anniversary Update.

We distribute the Internet via Wi-Fi from a laptop or computer in Windows 8

Unfortunately, Windows 8 does not have a graphical interface for setting up a peer-to-peer network, so we will use the command line to set up the Internet via Wi-Fi in some steps.

It must be said that this method of distributing the Internet via Wi-Fi, described for Windows 8, is also suitable for Windows 7 without any additions. All steps are completely identical.

1. Open Network connections in a way convenient for you, for example, by pressing the + R combination on the keyboard and typing in the window Run command ncpa.cpl, press the button OK.

3. Switch to the tab Access and enable the option Allow other network users to use this computer's Internet connection. If the second parameter Allow other network users to control Internet connection sharing. Then press the button OK.

4. Next, you need to run a command prompt with administrator rights. Open the start menu and type cmd. In the search results on the line Command line right-click and select from the context menu.

5. At a command prompt with administrator privileges, type:

netsh wlan set hostednetwork mode=allow ssid=" "key="

Where is the name of your network and The network connection password that you will need to enter in order to connect to the access point. In this case, the connection will be based on WPA2-PSK (AES) encryption.

netsh wlan start hostednetwork

From this moment on, your computer or laptop is ready to distribute the Internet via Wi-Fi.

7. At any time, you can view connection information, where you can find out which channel your connection uses, access point name, authentication type, Wi-Fi type and number of clients connected to the network.

netsh wlan show hostednetwork

8. You can stop broadcasting the distribution of Wi-Fi Internet with the following command:

netsh wlan stop hostednetwork

Internet sharing via Wi-Fi in Windows 7

As mentioned earlier, you can set up Internet distribution in a way that is suitable for Windows 8. But we will consider using a computer-to-computer (Ad-hoc) network to distribute the Internet via Wi-Fi. This method is interesting in that you do not need to use the command line to configure the distribution.

1. Open in Control Panel Network and Sharing Center. In the Change network settings section, click on Set up a new connection or network.

2. Then in the window that opens, select and click Further.

• Network name- invent to your taste;
• Security type- select WPA2-ptrsonal;
• Security key- set the password that will need to be entered in order to connect to the network.

4. The system will automatically configure Internet distribution via WiFi and show a Wi-Fi network connection readiness window with the specified parameters. In the window that appears, click Turn on Internet Connection Sharing.

We distribute wired Internet through the application

We install, start, specify the network name (SSID), set the desired password, and select our wireless connection that we want to distribute. We press the button Start Virtual Router, and you're done. Below you can see a list of connected devices. There is simply nowhere to go.

Setting up Internet distribution via Wi-Fi may seem like a troublesome task for some, but in fact it is not so difficult. It all depends on what version of Windows you are using. In addition, you can always use a third-party application, which comes down to an even simpler way to make a hotspot out of your computer or laptop.

Now you can always use this article to distribute your Internet channel via Wi-Fi, even if there is no Wi-Fi router at hand.